Fluorometer

Home/Fluorometer

In 1967, JASCO launched the FP-1, which was the first in a long line of spectrofluorometers. The FP-8000 Series is the latest comprehensive range of instruments, developed to provide accurate measurements for bio- and material sciences, from a simple entry level model for fluorescence spectral measurements and sensitive quantitation to the advanced models developed for demanding research applications including spectral correction and quantum yields.
The FP-8000 series is comprised of four models each of which offer an optimized solution for fluorescence and phosphorescence applications, although some models such as the FP-8000 and FP-8500 cover a wider range of applications for Biosciences and materials.

FP-8200 Spectrofluorometer

Spectrofluorometer FP-8200 JASCO

Spectrofluorometer FP-8200 JASCO

The FP-8200 is a general-purpose instrument. The simplified yet powerful design is perfect for users that require routine fluorescence measurements in a quality-control environment. The standard Auto-SCS and Auto-Gain features enable measurements to be obtained over a wide range of concentrations using only one method. Two graphical user interfaces are available: Spectra Manager™ cross-platform spectroscopy software that allows full system control of the instrument, separate from the data processing and analysis, and the intelligent remote module (iRM) with a color LCD touch screen.

Features

  • High sensitivity S/N > 1,600 (RMS)
  • Dynamic range up to six digits
  • High speed scanning up to 20,000 nm/min
  • Wavelength range: 200 to 750 nm (900 nm optional)
  • Higher order diffraction band-pass filter (optional)

FP-8300 Spectrofluorometer

Spectrofluorometer FP-8300 JASCO

Spectrofluorometer FP-8300 JASCO

The FP-8300 is a user friendly spectrofluorometer with a wide range of accessories that are well suited to biological research. The standard automatic band-pass filters obtain spectra without the artificial peaks due to second order diffracted light. The Auto-Gain and Auto-SCS functions optimize the S/N for samples with large differences in signal intensity and concentration. Temperature control accessories can be used for thermal melting studies, providing researchers with fluorescence and thermodynamic data for conformational and folding studies. FRET measurements offer insight on binding and folding dynamics. The FP-8300’s automatic polarizers can perform fluorescence anisotropy measurements to provide information regarding fluorophore mobility. Kinetic and titration measurements can also be performed with the dedicated stopped-flow and autotitrator systems.

Features

  • High sensitivity S/N > 2,800 (RMS)
  • High resolution of 1.0 nm
  • Wavelength range: 200 to 750 nm (900 nm optional)

FP-8500 Spectrofluorometer

Spectrofluorometer FP-8500 JASCO

Spectrofluorometer FP-8500 JASCO

The FP-8500 spectrofluorometer has an optimized optical design for very low stray light and a dynamic range of up to 6.5 orders of magnitude. It is exceptionally sensitive with a Raman S/N ratio of 8,500:1 (RMS), which allows for fast measurements of samples with low level fluorescence. The high spectral resolution of 1.0 nm, automatic band-pass filters for exclusion of higher-order diffraction, and accurate spectral correction assures accurate measurements for the evaluation of advanced materials. The high-speed scanning enables fast measurements of 3D spectra and phosphorescence samples.

Features

  • High intensity continuous output Xenon arc lamp
  • Energy monitoring of the excitation energy for stability
  • Shutter to protect samples until measurement
  • Stray light rejection filters
  • High sensitivity S/N 75,000:1 (RMS, water Raman)
  • High-speed scanning up to 60,000 nm/min
  • Wavelength range: 200 to 750 nm (850 nm optional)
  • Validation accessory comes standard

FP-8600 NIR Spectrofluorometer

Spectrofluorometer FP-8600 JASCO

Spectrofluorometer FP-8600 JASCO

The FP-8600 NIR spectrofluorometer uses a ‘red’ sensitive PMT to obtain data from the UV to the NIR regions. The excitation wavelength range of 200 to 850 and up to 1010 nm for fluorescence emission allows measurements of materials which have fluorescence in the NIR region. The small instrument design incorporates high-speed Ex ad Em scanning grating monochromators, with adjustable spectral bandwidths and automatic band-pass filters to exclude higher-order diffraction. The FP-8600 is well suited to analysis of carbon nanotubes and biological sample measurements made using NIR fluorescence reagent dyes to avoid auto-fluorescence.NIR model for evaluation of new materials such as carbon nano-tube, NIR fluorescent dyes, up-conversion fluorescent glasses, etc.Features

  • High sensitivity S/N > 2,500 (RMS)
  • Many options include, solid sampling, spectral correction and quantum yield with ambient and LN2 cooled
  • integrating spheres
  • High-speed scanning up to 120,000 nm/min Emission
  • Wavelength range: 200 to 1010 nm Emission (up to 850 nm, Excitation)
  • Validation included
  • Wavelength range Ex: 200 – 850 nm, Em: 200 – 1010 nm
  • Fast spectral scanning (Ex: 60,000 nm/min, Em: 120,000 nm/min)

Instrument

Brochure

Fluorescence Spectrometers Jasco FP-8000 Series

FP-8000 Accessories

Leave a Comment